dj-c6 aluminium mats

(1) Anti-fouling and dust removal: It can block 90% of dust and dirt outside the door, reducing the friction between sand, impurities, and the ground.
(2) Abrasion resistance and anti-slip: The surface of the high-density synthetic fiber material is treated with concave-convex patterns, providing strong abrasion resistance and anti-slip capabilities, which can significantly enhance pedestrian safety when entering and exiting.
(3) Moisture-proof: The coarse and fine fibers are arranged in a dense and sparse pattern, with fine fibers absorbing moisture that can be expelled through coarse fibers, allowing for fast drying, and preventing mold growth.
(4) Noise reduction, cold&high-temperature resistance: Equipped with built-in professional noise-reducing rubber strips and gap rubber, as well as an anti-fouling treatment layer, it is capable of withstanding severe cold, elevated temperatures, and static electricity.
(5) Colors optional: The diversity of carpet colors and the flexibility of customized designs add a fashionable style, enhancing the overall image.    

(1) Frame: The mat frame is made of corrosion-resistant hard anodized aluminum alloy 6063-T5 (compliant with standard GB5237.3.2004), with a wall thickness of 1.1mm and a total thickness of 12mm. Its load-bearing capacity can reach 1000kg/m² under standard rolling conditions without deformation, demonstrating strong bearing strength.

(2) Carpet: The carpet surface material adopts striped carpets from Belgium, Milliken and 3M carpets from the United States, and other world-renowned brands that also excel in color fastness, flame retardancy, anti-slip, anti-static and other functions. The carpet surface can be replaced separately to reduce maintenance costs;

(3) Connection: The floor mat profiles are interlocking, allowing the installation of ramp frames. This design does not accumulate dirt and is easy to clean. It can be easily installed, disassembled, transported, installed, cleaned, and maintained.

(4) Installation: Two installation methods are available: recessed and flat. Installation within a recess provides better and safer results.

(1) It is recommended to use a vacuum cleaner (preferably a roller-type vacuum cleaner) daily to remove dust and dirt from the surface of the mat, maintaining its clean appearance and dirt removal function.
(2) Regularly and slowly roll up (or move away) the mat from the groove (or the floor) and clean the dirt inside the groove (or on the floor).
(3) It is advisable to use a neutral cleaning agent with a carpet extractor once a week to clean deep-seated dirt from the mat's surface.
(4) For stubborn stains, a mild cleanser and a bristle brush can be used for wiping.
(5) For EVA or polyethylene grass material cleaning, simply rinse with clean water.
(6) When cleaning the surface of the mat, it is recommended to use a high-pressure water gun aimed at the mat to thoroughly remove residual dirt and mud.
(7) When cleaning commercial indoor mats, it is suggested to use alkaline or neutral cleaning agents. When using a cleaning machine, wash at room temperature or below 50°C.
(8) When using commercial mats, it is advisable to have two sets of mats for alternating use, which can extend their service life.  

(1) Groove Installation: Before use, preset the area for the mat during floor construction and reserve a groove of 20mm-23mm. During floor construction, ensure the bottom cement in the groove is level. After the cement has fully cured, place the mat into the groove. Use decorative trim strips around the edges of the mat.
(2) Flat Installation: With a height of 2.2cm, the mat is directly laid on the floor. The decorative frame around the mat is a sloping frame, which does not interfere with walking or cause tripping. The back of the mat is equipped with a 3M foam backing to prevent shifting.